Reassemble and Test. Get the logic board assembled and buckle the display assembly. The name of the lighting effect ‘Natural Light’ turns yellow when the camera detects a person's face. There is also a flashing red light from the Dot Projector. Next, continue to set up Face ID. Fault cleared.
Typically the earpiece is the weakest part of the phone for water resistance. So it would make sense for Face ID to break first after submersion. If you want the best chance of saving the phone, take it to a level 3 (microsoldering) specialist so they can analyze the board up close for any signs of corrosion.
Hold the side button and either volume button until the slider appears. Slide it off, wait a moment, and then turn your iPhone back on. Resetting Face ID. If rebooting doesn’t work, navigate to Settings > Face ID & Passcode. Enter your passcode, then tap ‘Reset Face ID.’ After this, set it up again to see if the problem persists.

After a screen replacement, iPhone 13 Face ID is not available. It can be confirmed that changing the screen on iPhone 13 through third-party repair will res

My iPhone 11 worked well; I used it every day. The expected trade-in value was $370, but then I got a message from Apple claiming the Face ID function doesn't work on my phone (despite me using it every day before sending it) and a re-evaluted value of $90 (-$280 in value). I asked for more details, so support sent me the evaluation report

The company also declined to explain why Face ID was disabled after screen replacement, when the Face ID flood illuminator is entirely separate from the screen in the iPhone 13. It remains a stunning coincidence that bugs affecting repair outside Apple’s purview— Touch ID and cameras , to name two—are often the most severe, and the
Face ID stopped working. iPhone XS is up to date. Face ID stopped working on my iPhone XS today out of the blue. Phone is up to date. Tried resetting Face ID but it won’t recognize my face when it says to place my face in the box. Won’t progress to next step of turning my head. Seated the earpiece speaker/prox sensor/etc assembly into the new screen. Put it back together. The facial recognition works. The prox sensor works. Everything works except the earpiece speaker. I did every troubleshooting I could think of. All I’m left with is maybe the earpiece speaker connection with the assembly got loosened (it seems to

Sometimes, damage to the display can affect FaceID. This could be because the sensors are physically unable to look through the broken glass or because the flood illuminator (which is a part of the display) has been damaged. This kind of damage is more common and can be fixed with a new display. 10. Valrien.

Page Contents. Fix: iPhone 13, 13 Pro, and 13 Pro Max Face ID Stopped Working After New Update. Method 1: Check Face ID settings. Method 2: Remove and reset Face ID. Method 3: Add an alternate appearance. Method 4: Clean the Camera area. Method 5: Wipe and reset your phone. Method 6: Take it the pros. Conclusions.
Fix Face ID by resoldering sensors to new flex 😊0:42 Face ID is not working1:12 Front sensors cable is broken1:21 Both sensors are paired with CPU, so we wi .
  • gf92b2u4b1.pages.dev/181
  • gf92b2u4b1.pages.dev/18
  • gf92b2u4b1.pages.dev/297
  • gf92b2u4b1.pages.dev/292
  • gf92b2u4b1.pages.dev/344
  • gf92b2u4b1.pages.dev/7
  • gf92b2u4b1.pages.dev/303
  • gf92b2u4b1.pages.dev/498

    • iphone 11 pro face id not working after screen replacement